Generator Device - Gradient生成器设备 - 渐变

所有版本可用

The Gradient generator produces a constantly sloping plane that is optionally tiled or clipped in world space.

渐变发生器产生一个不断倾斜的平面,选择瓷块或夹在世界空间里。

设备参数
Direction The direction of increasing value of the plane. 0 = east, 90 = north, 180 = west, 270 = south.
方位 增加平面的方向值。0=东,90=北、180=西、270=南.
Width The amount of space used to transition from low to high. Specified in world coordinates, the default is 1.0.
宽度 过渡空间使用量从低到高。世界坐标中指定,默认值为1.0.
Tiling The Tiling Method describes how to deal with areas that lie outside of the "primary" gradient location.
瓷块 平铺方法描述如何处理区域之外的"primary"渐变位置。
None: The gradient will not be tiled in world space. Outlying areas are clipped to zero or one in height.
渐变将不会被平铺在世界空间中。外围地区被剪切到零个或一个高度.
Linear: The gradient will tile in world space. After reaching the maximum value, the gradient will reverse itself until reaching zero value, then repeats.
直线型: 在世界空间中的渐变将平铺。 达到最大值后,渐变就会倒流,直到达到零值,然后重复。
Discontinuous: The gradient will tile in world space. After reaching the maximum value, the gradient will jump immediately back to zero.
不连续的: 在世界空间中的渐变将平铺。 达到最大值后,渐变立即会跳回零。